Ideal for measuring the thickness of bent materials such as PCB, resin plate, glass plate, metal plate, etc. The thickness of the workpiece is measured by the vertical sensor.
It solves the problem of warpage of the measurement object and the adhesion to the measuring table.
| Measurement range | 0-12mm thickness 500mm depth |
| Unit of measurement | 1.0μm |
| Measurement method | Sum-difference calculation method using upper and lower sensors |
| Measurement pressure | Can be changed by consultation |
| Measurement accuracy | ±1μm20℃ |
| Upper probe | Φ3 ball probe |
| Lower probe | Φ10 one type probe |
| counter | 6 digit LED green display |
| Printer | Thermal line printer |
| Recording sheet | Thermal roll paper: 58mm wide, 48m roll |
| Air source | 3kg / cm² or more |
| option | RS-232C output cable |
| Power supply | input AC100V～240V：50/60Hz |
| weight | About 50kg |
